Each one in plain English, with the numbers worked through for a shareholder.
19 July 2012drilling result▲ Good
Two deep holes (977m) at Lone Mountain's Rip Van Winkle intersected wide pyrite-rich breccia, at least 200m wide; assays due within a fortnight. Bartlett channel sampling returned 42m at 0.44g/t gold. Osisko funds the program; further Nevada drilling set for August-September.
A 4,000m reverse circulation drill program began at Lone Mountain, testing Carlin-style gold targets at the Rip Van Winkle and South Jasperoid prospects, funded by Osisko. It is the first of four planned Nevada drill programs for 2012. This follows the gravity survey.
A 2,000m reverse circulation drill program began at Sara Sara, Peru, the first follow-up to the 2010 silver hit of 16.4m at 410g/t. Mineralisation is open in all directions. This is Global's first Sara Sara drilling since that 2010 discovery.
Field programs have started in Nevada and Peru, with 5,000m+ of drilling scheduled for the June quarter, including 2,000m at Sara Sara from May and 3,000m at Lone Mountain. Global describes the 2012 exploration budget as fully funded at $2.5M.
A detailed gravity survey (547 stations) at Lone Mountain identified untested drill targets at 100-300m depth that could host Carlin-style gold. Drilling is planned and will be funded by Osisko under its US$8M earn-in. Follows the December gravity work; no drill results yet.
Osisko Mining can earn 45% of Global's five Nevada gold projects by funding US$8M over up to four years (minimum US$2M in year one), and has subscribed A$852,000 for 14.2M shares at $0.06. Global stays operator. Osisko can lift to 70% by funding a feasibility study.
Global's first Excelsior drilling, 23 RC holes (3,657m), hit shallow oxidised gold across 2.2km, e.g. 7.6m at 5.1g/t from 93m. Mineralisation is open along strike and at depth. Infill drilling is planned. This follows the July drilling start.
Drilling starts next week at Excelsior, Nevada: about 2,000m of RC to follow up Buster zone intersections (e.g. 47m at 1.5g/t Au) and test three new, previously undrilled targets. Global is earning 70% of the project.
An induced polarisation survey has started at Excelsior Springs, covering 3km of the mineralised trend and five gold zones, three never drilled. It should take about three weeks, with drilling scheduled to begin in July.
The Sara Sara diamond program ended after seven holes (3,600m). Best result was KPD-03 at 36m at 0.27% Cu; the other six hit only sporadic low-grade copper and molybdenum. No porphyry copper has been found yet. Future RC silver drilling and a deeper hole to 1,500m are planned, subject to a rig.
Global can earn 70% of the Excelsior Springs gold project in Nevada from Canada's Nubian Resources by spending $3M over four years plus $100,000 cash; minimum $150,000 by end 2011. Includes the historic Buster mine, with past drill hits such as 33m at 2.9g/t Au. This adds a new gold project.
Sara Sara hole KPD4 hit only thin, low-grade copper: 3m at 0.25% from 222m and 9m at 0.13% from 267m, weaker than KPD3's 33m at 0.28%. Management attributes this to quartz-rich rock unsuited to enrichment. KPD5 is finished at 507m; KPD6 has started.
Dry weather lets Sara Sara drilling continue into February. KPD4 is complete at 495m with assays pending, KPD5 is at 446m. Sequential tests show 81-99% (average 92%) of the copper is leachable, supporting the supergene interpretation.
Sara Sara hole KPD3 hit 33m at 0.28% copper from 183m, mainly chalcocite in a supergene (enriched, often leachable) blanket. Management says all three holes in the Target Zone show it, and sees it as evidence of nearby primary copper. This is a new discovery-style result.
Surface sampling extended the untested copper-gold anomaly at the 100%-owned Bartlett Peak, Nevada, to 400m by over 1,000m, with rock chips up to 1.5% Cu. An IP survey is planned early 2011 before any drilling; a drill permit has been applied for.
Diamond drilling has restarted at Sara Sara with hole KP-24, the first of up to four 800m holes testing for a large porphyry copper system beneath earlier copper intersections. Shallow high-grade silver will be tested by RC drilling once a rig is available.
A diamond rig is under contract and drilling at Sara Sara is expected to start mid-November, with up to four 800m holes testing the porphyry copper target suggested by the September and October results. This follows through on the planned Dec-quarter follow-up drilling.
Further analysis of Sara Sara drilling suggests porphyry copper to the west, citing 127m at 0.11% Cu in KP-14 and 27m at 0.31% Cu in KP-20. Management says it is closing in on the porphyry and further drilling is justified. This is an interpretation, not a new hole result.
Sara Sara's Kapish prospect returned a high-grade silver discovery: 16.35m at 410g/t Ag, 0.14% Cu from 238.7m in hole KP-14, with some poor core recovery. Other holes show copper and molybdenum, open to the north, west and southwest. This follows the KP10 diamond and RC program.
Diamond drilling has started at New Morenci in Arizona, one hole testing for a buried secondary copper blanket like that at the Morenci mine 1km south. No previous drilling is known in the area. This follows the early-August start planned earlier.
Diamond drilling has started at Sara Sara to test the centre of the 2.5km IP high, about 800m of core. A 2,000m RC program follows in August to chase the KP6 molybdenum result. This is the first deep test of the porphyry idea.
IP surveys at Sara Sara found a roughly 2.5km-wide deep chargeability high, interpreted at 400-500m depth, plus shallower highs. Global added at least one 800m diamond hole to the 2,000m RC program; the diamond hole starts late June, RC in August.
An IP survey has started at the Quillcata copper-gold prospect at Mancha Pampa, where a 150m by 600m surface zone had been identified. Drilling is planned once results are interpreted. This is the next step after Buenaventura's 2009 exit.
An induced polarisation survey over 30+ sq km has started at 100%-owned Sara Sara now the wet season has ended, following the January drilling (24m at 877ppm Mo). A second drill program is set for June with a rig contracted; New Morenci drilling expected in coming weeks.
First Sara Sara drilling hit 24m at 877ppm molybdenum from 126m in hole KP6, including 6m at 1,530ppm. The nearest hole is 550m away. An induced polarisation survey is planned for April-May, with follow-up drilling in May-June.
First drilling at Sara Sara is set to start next week. Approvals are in hand and the drilling contract is signed. Up to ten 200m holes, about 2,000m in total, will test for copper enrichment beneath the leached surface rocks.
First three Sara Sara tenements (18 sq km) are granted, and Global plans wide-spaced drilling of the porphyry copper-molybdenum target. New sampling shows molybdenum up to 449ppm in rock, in concentric zones. This moves the project from surface work toward drilling.
Satellite mapping outlines a 10 sq km zone of zoned alteration at the new 100%-owned Sara Sara porphyry copper project in Peru, matching soil anomalies up to 202ppm copper. Tenement applications expand to 36 sq km; drilling is needed to test beneath the leach cap.
New rock chip and mapping results support the idea that New Morenci, 2km north of the Morenci mine (6Bt at 0.42% copper), is a fault off-set of that deposit. A 600 by 400m copper-anomalous zone was found; 2-3 holes of 500-1,000m are proposed once approvals are obtained.
Peru's Buenaventura signs a Heads of Agreement to earn 61% of Mancha Pampa by spending US$3M over five years, including 1,000m of drilling before 31 December 2009. This delivers the farm-out to fund drilling that was being considered; Global can keep 39% afterwards.