Each one in plain English, with the numbers worked through for a shareholder.
11 Jan 2022drilling spud▲ GoodMajor
Diamond drilling of seismic target S1 (hole MAD206, planned 990m) has started at Mt Alexander, the first drilling of seismic targets. Interim CSIRO work dates the Cathedrals Belt intrusions at about 1.1Ga, linking them to the Warakurna Large Igneous Province.
The 2022 diamond program is brought forward, with a rig due at Mt Alexander about 6 January 2022 to drill S1 then S2. MAD205 finished at 622.2m with no sulphides seen, so the MAD200 conductor target went untested by a successful hole.
Seismic interpretation identified a second large target, S2, in the Transits Belt north of the Cathedrals Belt. It has a 400m dip extent from about 350m depth and the same seismic properties as S1. It will be drilled in the late January program. MAD205 is nearly complete.
Seismic identified a large target (S1) down-dip of the shallow Investigators massive sulphides, with the same signature as the known sulphides. It has a modelled dip-extent of over 450m, lies about 800m deep on 100%-owned E29/548, and drilling is planned for late January. It is a target, not a discovery.
Diamond drilling of deeper targets has started at Mt Alexander, running 24/7. Four holes are planned (MAD203-206) to test the 81,000 Siemens MAD202 conductor, the MAD200 conductor and step-outs from the MAD199 discovery (11.07m @ 1.58% Ni). No new results yet.
RC drilling at Carnac intersected mafic-ultramafic rocks up to 85m thick, and at Jailbreak (E29/962) komatiite up to 270m thick, based on logging only. Assays are pending. A seismic survey has started, and diamond rigs are due at Mt Alexander and Paterson.
Downhole EM in MAD202 at West End found a strong 81,000 Siemens conductor, consistent with massive sulphides. MAD201 assays confirmed 2.4m @ 1.66% Ni, 0.55% Cu, 125m down-plunge of MAD199. The conductor is untested; drilling is needed to confirm mineralisation.
RC drilling resumed at Mt Alexander, testing the Carnac, E29/972 magnetic and E29/962 soil targets on 100%-owned ground. Infill drilling at the shallow Cathedrals Prospect will also test continuity ahead of a potential resource estimate.
Paterson maiden program: 35 holes (6,264m) done, with chalcopyrite and pathfinder elements by XRF and petrography; first assays due next month. The RC rig moves to Mt Alexander, and diamond drilling is set for October after an airborne EM survey.
Soil assays at 100%-owned E29/1041 show a nickel-copper-chromium anomaly over 1,600m (peak 544ppm Ni, 97ppm Cu), above levels seen at the Cathedrals Belt. Named the Carnac Prospect, drilling is planned for mid to late August. Early-stage; no drilling yet.
Paterson maiden drilling: 18 holes (3,338m) done. Basement rocks include chalcopyrite-bearing intrusives and gossanous sediments, with elevated pathfinder elements by XRF. Cover is under 180m. Assays are pending; a diamond rig is being sought.
Downhole EM in MAD200 found three weak-to-moderate conductors, the largest 75m to the north-west; MAD196's three strong conductors remain untested. A seismic survey starts next week, and Stricklands scoping is trialling ore-sorting and glycine leaching.
Assays confirm the MAD199 discovery: 11.07m @ 1.58% Ni, 0.71% Cu from 333.5m, including 1.28m @ 6.54% Ni. This resolves the pending assays, replacing XRF-only readings. Deep radar survey is underway and a seismic survey is scheduled for next month.
Maiden drilling began at the 100%-owned Paterson Project: about 10,000m of reverse circulation drilling, roughly 50 holes over eight weeks, targeting copper and gold on E45/5226. This follows the planned June quarter start.
MAD201, the first step-out from MAD199, hit 2.4m of nickel-copper sulphides from 434.6m, 125m down-plunge, including a thin massive sulphide zone (XRF only; assays pending). Three strong conductors (up to 120,400 Siemens) were found, and drilling of a gravity 'bulls-eye' at West End has started.
A ground gravity survey at West End and Investigators found multiple untested gravity highs, including 'bulls-eye' targets, and more drilling is being prioritised. Downhole EM in MAD199 found three strong conductors, with follow-up drilling planned. MAD200 continues towards 600m.
MAD199 hit 10.96m of nickel-copper sulphides from 333.6m, including two massive sulphide zones with XRF readings up to 7.34% Ni and 2.94% Cu, at the 19,320 Siemens conductor. It is the deepest massive sulphide in the Cathedrals Belt; lab assays are pending. This is the first deep-drilling hit after 2020's disseminated-only results.
MAD195 missed the 33,100 Siemens conductor, but downhole EM found three new strong conductors (up to 22,950 Siemens) and MAD196 found three more (up to 69,926 Siemens). MAD197 extended the intrusive unit west to over 6.5km. Airborne magnetics showed new targets on E29/972 and E29/1041.
MAD195 (33,100 Siemens target, 340m) was at 315.4m and MAD196 (55,550 Siemens, 505m) at 118.1m. Preliminary portable XRF readings on Stricklands met holes reached up to 6.86% Ni; lab assays are pending. A CSIRO study of the mineralisation was announced.
A second diamond rig arrived and started drilling the 55,550 Siemens conductor (MAD192), targeted at 505m. The first rig, on the 33,100 Siemens target, was at 115.5m. This resolves the crew shortage reported on 23 Feb; drilling can run 24/7. No new results.
Diamond drilling of the 33,100 Siemens conductor (MAD185) started 22 Feb; the 55,550 and 26,000 Siemens conductors follow. Seven Stricklands metallurgical holes finished (483.2m), with core samples going to Canada. COVID travel limits cut drill crews to a single shift.
A 4,000m+ diamond programme starts this week to test the 55,550/26,000 and 33,100/14,225 Siemens conductors. A ground EM survey on E29/548 will look for a northern repeat of the belt. Petrography of MAD181 core confirms intrusive leuconorite and gabbronorite.
Downhole EM in MAD185, MAD192 and MAD193 identified new conductors, including 55,550 and 26,000 Siemens (MAD192) and 33,100 and 14,225 Siemens (MAD185), 500-800m north-west of known massive sulphides. They are drill targets only; no massive sulphide is confirmed.
MAD192 hit a 30m mafic-ultramafic unit from 440.5m with 6m of disseminated sulphides, but passed through the 49,000 Siemens target plate without finding conductive material to explain it. The conductor remains untested. MAD193 is now drilling the 16,200 Siemens target.
Downhole EM in deep hole MAD184 at West End found two very strong conductors (49,000 and 16,200 Siemens), the deepest at Mt Alexander and consistent with massive sulphide. Drilling to test them starts next week; no massive sulphide has been intersected yet.
More deep holes intersected mineralised mafic-ultramafic units: MAD185 (15m of sulphide-bearing ultramafic from 311.3m), MAD184 (5m from 462.7m) and MAD186 at Cathedrals (2.1m from 337.9m), all with under 5% disseminated sulphides. The company says the belt extends over 4km strike. No assays or massive sulphides reported.
Deep drilling found nickel-copper sulphides at depth: MAD181 hit a 48.7m mafic-ultramafic unit from 503m with a 10m sulphide-bearing ultramafic from 541m, and MAD183 at Fairbridge hit 11.6m from 359.3m. Sulphides are disseminated (<5%), not massive; no assays reported. Mineralisation is now established over 600m down-dip.
Deep holes MAD180 (wedge to 877m) and MAD182 (700.4m) found intrusive rocks, which the company says confirm the Cathedrals Belt continues at depth. DHEM on MAD179 found two strong off-hole conductors at Investigators. MAD181 and MAD183 are now drilling. No sulphide intercepts of note.
First deep hole MAD180 at Investigators hit a possible second mineralised ultramafic belt near surface and intrusive rocks at depth, but caved at 795m. It will be wedged from about 520m and redrilled. Second rig started MAD182 at Cathedrals. No assays yet.
Stricklands RC drill-out finished (52 holes, 4,077m) and metallurgical core drilling finished (661.6m), with core going to Canada for testing. Deep hole MAD180, planned to 800m, started on 1 July to test the large conductor below Investigators. No results yet.