Each one in plain English, with the numbers worked through for a shareholder.
13 Nov 2014drilling scheduled▲ GoodMajor
Drilling of the Dragon 3 EM conductor, expected to be a more central part of the VMS system than DDD011 (16m @ 0.45% Zn), starts next week. Gravity and MLEM surveys also found two new conductors north-west still to be tested. Interim XRF only.
Downhole EM on WINRC005 found an off-hole conductor near the Windsor disseminated nickel sulphides. The company says a possible source is matrix or massive sulphide. Hole WINRC006 is scheduled for the following week. A target only, not yet drilled.
Second Windsor hole, WINRC005, intersected 142m @ 0.31% Ni from 127m on interim XRF, including 5m @ 0.44% Ni. With WINRC004 and DRAC38, it outlines a nickel-sulphide zone open laterally and at depth. Sulphides are disseminated, not massive; assays pending.
First Phase 2 nickel hole at Windsor, WINRC004, intersected 83m @ 0.27% Ni from 63m on interim XRF, with higher-grade 1m @ 0.47% Ni. Disseminated sulphides only, not massive. This follows BHP's DRAC38; lab assays are still to confirm.
Four RC holes around DDD011 extended the VMS zone over about one square kilometre. Best interim XRF result was DDRC027: 12m (142-154m) at about 4000 ppm Zn and 1000 ppm Cu, trending towards the untested Dragon 3 conductor. XRF results are indicative only, pending lab assays.
Phase 2 RC drilling is underway at East Laverton, with over 4,000m planned. First nickel targets are Desert Dragon South, Windsor (follow-up of BHP's DRAC38, 30m @ 0.31% Ni) and Cambridge, plus the VMS prospect. Holes will be cased for downhole EM surveys.
Phase 2 drilling starts 8 October at East Laverton, with over 4,000m of RC drilling planned over about 6 weeks. Four holes will test for extensions of the DDD011 zinc-copper zone; Newexco found two new EM conductors north of it. Nickel holes to be announced.
Company escalates VMS exploration at East Laverton after DDD011 (19.25m @ 0.35% Zn, 0.1% Cu), with Dragon 3 to be drilled in October and the MLEM survey expanded. New VMS targets are expected for 2015 drilling.
Company details new Phase 2 targets: a new Desert Dragon South prospect, a possible granite dome at Desert Dragon North, and a fast-tracked Cambridge North survey. Phase 2 drilling is due early October. Targets only, no new results.
DDD011 at Desert Dragon intersected 19.25m of zinc-copper sulphides (69-88.25m, 3,455 ppm Zn, 938 ppm Cu), which the company calls a new VMS prospect. The adjacent Dragon 3 conductor is a priority Phase 2 target.
Phase 1 assays show the massive sulphides at the EM conductors are secondary with low nickel content, resolving the open question from July. The company says geology remains favourable, with follow-up targets and Phase 2 drilling set for early October.
Phase 1 is complete: 3,667m drilled (1,126m RC, 2,541.1m diamond). Thick komatiite was found in 13 of 15 diamond holes, and all holes testing EM conductors hit massive sulphides. Nickel content is unproven, assays are due early August, and Phase 2 is planned for early October.
Two new EM conductors at Desert Dragon were confirmed by FLEM: Dragon 2 rated Category One, Dragon 3 Category Two. Drilling starts this week. The regional MLEM survey resumes next week at Athena and Cambridge North, feeding Phase 2 later in 2014.
1,525m drilled so far in Phase 1 (477m RC, 1,048m diamond). All holes hit komatiite ultramafics and sulphides at the base, but XRF shows anomalous zinc and copper, suggesting a secondary overprint. Nickel content is unconfirmed; first assays are due late July/early August.
Phase 1 is confirmed underway, testing EM conductors at Desert Dragon North, Desert Dragon and Windsor. The plan is one diamond hole and two RC holes per conductor. Ground conditions are good. No drilling results yet.
Drilling under the 2014 nickel sulphide programme starts at East Laverton, with DDH1 Drilling on site. It is the company's first test of the EM conductors on the Stella Range belt. This is a start of drilling, with no results yet.
Phase 1 drilling at the 100%-owned East Laverton Property is set to start 26 May 2014, with the team mobilising 22 May. Windsor 1 is added as a Category One EM target. Hole designs are to follow. These are targets, not discoveries.
Phase 1 drilling of EM conductors on the Stella Range belt is planned to start around 22 May 2014 with DDH1 Drilling, the company's first test of these conductors. FLEM over the DDN1 conductor refined its position along strike from DDNRC002. Phase 2 is scheduled for the second half of 2014.
New strong EM conductors were identified at Desert Dragon, Desert Dragon North and Windsor, with Windsor 2 rated Category One and recommended for immediate drilling. The Plan of Works for 2014 drilling is approved, but the drilling contract is still being finalised. The MLEM survey has reached Bristol.
Assays for Desert Dragon holes DDD001 and DDD002 did not find nickel sulphides comparable to DRAC35 (18m @ 0.40% Ni), though they narrowed the search area. Modelling gives two new Category One DHEM conductors at 130m, with two diamond holes designed. DDD003 assays are still pending.
Moving loop EM survey restarts after Christmas, with 643 stations read so far. Desert Dragon assays are due late January and drilling is aimed to restart this quarter once targets are modelled. No new results.
Three Desert Dragon diamond holes (968m) hit thick komatiite with visible sulphides, and downhole EM found strong conductors in all three that could be massive sulphides. No assays yet, expected late January 2014; more holes planned after modelling.
Deep diamond drilling began at Desert Dragon, with three holes planned to test for massive nickel sulphides beneath the DRAC35 zone (18m @ 0.40% Ni). Nickel specialist Travis Kerslake joined, receiving 500,000 unlisted options. EM conductor results are due shortly.
Deep diamond drilling of priority nickel targets is to start the following week, first at Desert Dragon near DRAC35 (18m @ 0.40% Ni, 2012). The programme is planned to run into 2014 after a Christmas break. EM results on the Stella Range belt are still being analysed.
A moving loop EM survey has started over the rest of the Cambridge dunite body and about 12 km of the Stella Range belt, where DRAC35 (18m @ 0.4% Ni) and DRAC38 sit. Test drilling is planned for November 2013. No new results.
A more powerful fixed loop EM survey has started over three Cambridge anomalies first seen by an older, weaker survey. Results will shape a targeted drill programme, with test drilling scheduled for next month. This follows the 17 October announcement that the survey was imminent.
A soil survey and regolith mapping identified a new nickel prospect in southern Cambridge, where an EM anomaly coincides with anomalous soil nickel. A more powerful fixed loop EM survey is due within days, with a moving loop survey later in October, before any drilling.
Following the 100% consolidation, St George picks six priority nickel targets across the three ultramafic belts and plans ground EM surveys, starting the following week, with initial results due this month. EM would identify conductors for later drilling; no drilling is scheduled yet.
A geochemical review of the 2013 Cambridge drilling says the eastern and western margins are basal contacts and a high-MgO zone looks similar to Perseverance. Newexco is hired for geophysics. No new assay grades; the nickel sulphide potential remains untested.
Most lab assays from the first 2013 Cambridge drilling are in, and a supplementary soil survey has started to pick targets for phase two. The company says preliminary geochemistry supports nickel sulphide potential; no new grades are given, and a detailed review is promised.