Each one in plain English, with the numbers worked through for a shareholder.
15 Mar 2017drilling result▲ Good
Final aircore and diamond assays (93 aircore, 5 diamond holes) at Malingunde include 34m at 12.0% TGC. All 2016 drilling results are now reported. CSA Global has begun the maiden JORC resource, due within weeks; scoping study due late April 2017.
Second batch of aircore assays (65 holes) at Malingunde confirms consistent mineralisation and 20-30m thickness, e.g. 32m at 9.2% TGC and 24m at 11.9% TGC. Results are in for 87 of 180 holes; resource still on track for March.
First assays from the 5,517m, 180-hole aircore program at Malingunde (22 holes) include 30m at 15.3% TGC and 31m at 10.8% TGC. Company calls them the thickest high-grade zones yet. Maiden JORC resource now targeted for March, scoping study early Q2 2017.
First Malingunde diamond assays confirm thick, high-grade saprolite: 15m at 19.7% TGC within 25m at 15.1%. Grades continue to 20-30m depth, matching the hand auger results. Aircore drilling of ~5,000m starts this week; first resource targeted Q1 2017.
Final Malingunde hand auger batch gave the two highest grades yet: 7m at 24.5% TGC (including 2m at 35.5%) in a possible new zone about 2km south-east of the main deposit. The 13-hole, 488m diamond program is complete; ~5,000m aircore due in two weeks.
First five large-diameter diamond holes (196m) at Malingunde found saprolite graphite 20-30m thick, well above expectations. The company says this lifts tonnage potential and could make it a stand-alone operation. An aircore drilling program for a first resource is planned later in 2016.
New Malingunde hand auger results, such as 9m at 18.8% TGC, confirm high grade over 3.4km of strike. The maiden diamond drilling program (~500m of PQ core) has started at the saprolite deposit, with first metallurgy due in September.
Duwi scoping study: base case ~110,000t a year of concentrate over 20 years, operating cost US$498/t FOB Nacala, initial capex US$112m before contingency, 1.7-year payback. Preliminary only; 23% of the production target is Inferred. Resolves the scoping study thread.
Hand augering at Lifidzi found saprolite graphite in 19 of 43 EM conductors, averaging 6.5% TGC (peak 12.0%). Air-core at Dedza Mountain West confirms saprolite over 3.2km. Extends the low-cost saprolite theme beyond Dedza; early-stage results.
Maiden JORC resource at Duwi: 86Mt at 7.1% TGC (6.13Mt contained graphite, 5% cut-off), with 35Mt Indicated. Resolves the open resource thread. A scoping study on 30,000tpa and 65,000tpa production scenarios starts immediately.
The 2014 Duwi drilling is complete: 48 RC and diamond holes (5,285m) assayed, with results such as 76m at 9.3% TGC. Mineralisation spans ~2.2km of the ~24km Duwi Trend and stays open. CSA Global is modelling the maiden resource, due mid-October.
First 11 RC holes of the 2014 Duwi program returned thick shallow intercepts, e.g. 84m at 9.8% TGC from 24m. Supports the 2013 modelling. 31 RC and 4 diamond holes are still awaiting assays; maiden JORC resource expected early Q4 2014.
Trenching found a new graphite zone, Duwi Bend, just east of Duwi Main: one trench returned a cumulative 170m at 8.0% TGC. A second new zone is mapped at Nyama. Drilling continues toward a maiden JORC resource in Q4 2014.
Trenching at the newly discovered Dedza Mountain East graphite prospect, in the 100%-owned Malawi project, returned widths such as 20m at 10.3% TGC in soft saprolite, mapped over ~4km. A second zone, Dedza Mountain West, is mapped over ~20km; trenching is under way. A second major target beyond Duwi.
Partner Mount Isa Mines (Glencore, formerly Xstrata Copper) drilled 20 holes for 3,612m at Mongoose near Cloncurry, with intercepts such as 16m at 4.20% Cu. Sovereign holds 38% of the Carpentaria JV; Mount Isa Mines will review before deciding further drilling.
First drill results confirm medium to high-grade flake graphite at Duwi and Nanzeka, e.g. Duwi 48m at 7.7% TGC and Nanzeka 10m at 11.0% TGC. Ten holes (1,388m) and 15 trenches done; mineralisation is open along strike and at depth. Grades are moderate versus earlier rock-chip highs.
Initial diamond drilling has begun at the Central Malawi Graphite Project: a 9-hole program at the Duwi Trend and Nanzeka to test depth and grade and obtain fresh material for metallurgy. Duwi trenching is finished. Follows the planned trench-then-drill sequence.
First trenching results at Nanzeka (Malawi graphite) show wide high-grade bands, e.g. 34m at 13.3% TGC and 38m at 11.7% TGC, over ~2km strike. Confirms the earlier rock-chip results. Duwi trenching and ~1,500m diamond drilling await permits, expected within weeks.
Third rock-chip batch found two new high-grade prospects: Chipili (96 samples, 56 above 10% TGC averaging 15.1%, peak 35.3%) and Nyama (102 samples, 38 above 10%, averaging 12.9%). With Duwi and Ukonde, the Duwi Trend now exceeds 18km. Trenching then diamond drilling is planned.
Preliminary VTEM results over 4,116 line km indicate graphite gneiss strike length above 200km. At least 11 new strong conductors lie within 15km of Duwi and over 20 in EPL0355, with 31 high-priority conductors identified overall. Field checks have begun; this guides where to trench and drill.
Second batch of rock-chip results extends the Malawi graphite zones. Duwi: 150 samples, 75 above 10% TGC averaging 15.2% (peak 46.0%) over 2.5km. Ukonde runs over at least 5km; Nanzeka over 2.0km. The VTEM survey is 1,485 of ~4,000 line km complete.
A targeted ~4,000 line km HeliVTEM survey has started over the Malawi graphite project to define trench and drill targets. Trenching at Duwi-Ukonde is planned for early to mid 2013, and metallurgical results are expected in early 2013. Follows the November completion.
Rock-chip sampling at the Malawi graphite project found new high-grade zones: Duwi averaged 13.9% total graphitic carbon (peak 46.0%) over about 10km strike with Ukonde. A large airborne survey and metallurgical tests are coming; McCourt completion is expected late October/early November.
First RC drilling at Tate River's Blade Vein (37 holes, 2,539m) found shallow gold-silver-lead-zinc mineralisation over a 1.5km strike, e.g. 3m @ 60g/t Ag, 4.2% Pb, 2.0% Zn, 0.65g/t Au from 15m. Four diamond holes are now drilling.
RC drilling began at Tate River in early July, about 5,000m planned. Rock chips in the Blade Vein halo returned up to 57.3 g/t Au, and an IP survey shows a conductive anomaly along the full 1.6km vein. No drill results yet.
Mapping extended the Piccaninny epithermal vein system to 8.5km of outcropping veins, up from the initial 250m discovery. Rock chips reached 6.9 g/t Au and 768 g/t Ag. About 5,000m of RC drilling is planned at Tate River.
Rock chips at Tate River found silver-rich veins at the new Piccanniny prospect (up to 508 g/t Ag) and extended Golden Myall (up to 4.49 g/t Au). Native title clearance is done and a drill rig is contracted, starting once weather permits.
First air core drilling at the 100%-owned Undina South returned shallow vanadium-molybdenum, e.g. 12m @ 0.37% V2O5 and 351ppm MoO3 from 8m. Sovereign sees potential for a large shallow resource. Golden Myall heritage clearance is also done.
RC drilling began at Rocklands SE (formerly Mt Avarice), about 5,000m over 2km of strike, targeting extensions of Xstrata's 2005 intercept of 55m @ 0.37% Cu. Sovereign has booked the rig for the season.
Sovereign elected to proceed with the Tate River farm-in after review found 18 gold anomalies. The Golden Myall prospect is a drill-ready target (rock chip up to 6m @ 7.1g/t Au), with RC drilling planned after an October aerial survey.