Each one in plain English, with the numbers worked through for a shareholder.
9 June 2021resource reserve update▲ GoodMajor
Maiden Kasiya resource: 644Mt at 1.01% rutile (6.5Mt contained, Inferred), including 137Mt at 1.41%. It covers only 49km2, 43% of the 114km2 drilled footprint. Resolves the long-delayed resource thread; a Scoping Study is underway.
Phase 9 drilling (204 holes) expands the Kasiya high-grade envelope about 35% to 89km2 from 66km2, taking total drilled rutile area to ~114km2 with Nsaru. All data for the maiden resource are now in, with the estimate due in coming weeks.
Phase 8 Kasiya drilling (70 holes, 725m) defines broad very high-grade zones, many above 1.5% rutile in the top 3-5m, best 13m @ 1.47%. Completes 400m x 400m drilling of the ~30km2 central core. Maiden resource now expected in Q2 2021, slipping again from the March quarter.
Phase 7 Kasiya drilling (82 hand-auger holes) triples the rutile-mineralised footprint to ~66km2 from ~22km2, with strike now over 16km and width up to 6km. Best extensional intercept 12m @ 1.47% rutile. Central ~30km2 is under consideration for the maiden resource.
Phase 6 Kasiya drilling extends strike a further 1km to >7.5km, up to ~3km wide, best infill 11m @ 1.52% rutile. A new zone appears ~3km west. Seven holes show ~2% graphite. Maiden resource still expected toward end of quarter.
Phase 5 Kasiya drilling returns the highest-grade rutile yet (10m @ 1.53%, incl. 3m @ 2.31%) and extends strike about 1km to ~6.5km. First infill holes confirm central-zone grades. Maiden resource expected toward the end of the quarter.
Phase 4 Kasiya results (17 holes) extend the zone to up to 3km wide over >5.5km strike, best 14m @ 1.24% rutile (incl. 4m @ 1.95%). Rutile grain size d50 averages 129µm. Maiden resource still on track for late Q3 2020.
Phase 3 Kasiya hand-auger results extend high-grade rutile to >5.5km strike, surface width averaging >2.5km, best 11m @ 1.37% (incl. 5m @ 1.82%). Still open; maiden JORC resource on target for late Q3 2020. Drilling has paused for Covid-19.
Final Bua Channel results from late-2019 drilling (37 air-core, 49 hand-auger holes) extend rutile mineralisation to over 8km, best hand-auger 6m @ 1.09% rutile. Drilling of the remaining ~42km is being planned, with timing tied to the end of Malawi's Covid-19 lockdown.
Phase 2 Kasiya drilling extends high-grade rutile to more than 3.4km strike and 1.8km width, best 15m @ 1.12% rutile from surface. Still open along strike and to the south-east. Covid-19: the Lilongwe office is suspended but drilling continues, with no near-term impact expected.
Maiden Kasiya hand-auger results show high-grade rutile from surface over more than 1.8km width, best 7m @ 1.27% rutile (incl. 3m @ 1.80%). 14 of 19 holes hit the zone. The company calls them its best rutile results yet and targets a JORC resource later in 2020.
First 17 of 54 air-core holes at Bua Channel confirm rutile over more than 5km of length, best 8m @ 0.88% rutile from surface. Ilmenite is ~60% TiO2, possibly suitable as chloride feedstock. Drilling of the remaining ~40km is being planned.
New sand-hosted placer rutile discovery at Bua Channel, drilled over 8km of a ~50km channel. Best hand-auger result is 7m @ 0.81% rutile from surface. A new exploration licence covers a +40km northern extension, adding a second style of rutile alongside the saprolite prospects.
New Kasiya soil anomaly is ~2.4km wide, with observed rutile significantly higher than any previously tested anomaly. 19 hand-auger holes are drilled with results pending, and late-2019 drilling results (101 hand-auger, 68 aircore holes) are due shortly. No grades yet.
Aircore drilling has begun to test rutile at depth (15-30m) at Railroad, Railroad West and a new regional prospect. About 45 holes for ~1,000m are planned. First results are expected toward the end of January 2020.
First quantitative rutile drill results at Railroad include 13m @ 1.08% (incl. 6m @ 1.25%) from surface. Mineralisation spans at least 1.6km by 300-500m and is open to the south west. The company will target an initial resource; Sierra Rutile's deposit is cited at 1.1%.
Regional soil sampling (649 samples) identified six new rutile zones in the west, up to ~2.2km wide along lines. 35 hand-auger holes, averaging 10m depth, showed visible rutile; lab quantification is pending. Aircore drilling is expected in coming months. No grades yet.
QEMSCAN analysis of the Wofiira rutile product shows a d50 grain size of 123µm, close to Rio Tinto's RBM and Tronox's Namakwa (both 124µm). Sovereign says it suits all major rutile end-uses. Builds on the 24 June 96.0% TiO2 metallurgy.
First rutile metallurgy produced a 96.0% TiO2 product at a recovered grade of 1.16%, from a 180kg sample at Wofiira. The company says it compares well with Sierra Rutile's product and suggests a possible rutile province across its >4,000km2 ground. Follows the January rutile assays.
Re-assay of 125 old hand-auger holes shows widespread near-surface rutile potential: 26 holes average 2.34% TiO2 and 96 holes 1.89%. Includes a ~7km by 1.5km zone at Malingunde. Builds on the 2018 rutile find; more testwork needed before any resource.
Bulk auger drilling began at Malingunde to extract ~100 tonnes of ore for a pilot plant. About 40 tonnes will go to SGS Lakefield to make ~3.5 tonnes of concentrate for potential offtake partners. Company says offtaker demand drove this; PFS results due in coming weeks.
Company reports rutile and leucoxene (titanium minerals) within the Malingunde graphite deposit, e.g. 25m at 1.45% TiO2 from surface. Early tests made 78-90% TiO2 concentrates from graphite tailings. Potential co-product revenue; proof-of-concept only, with graphite remaining the focus.
Updated Malingunde resource: 45.7Mt at 7.2% TGC (saprolite plus saprock), 81% Measured and Indicated, including a high-grade 14.5Mt at 9.7%. Up from the 2017 saprolite 28.8Mt; the high-grade tonnage rise comes mainly from adding saprock. It becomes the PFS focus.
Final 71 of 209 aircore holes at Malingunde confirm wide, high-grade graphite, e.g. 21m at 21.7% TGC and 26m at 17.2% TGC. One zone flattens and stays open to the west, a possible tonnage addition. Updated resource still due late Q2 2018.
Drilling found a new zone of high-grade saprolite graphite at Msinja, 1.5km south-east of Malingunde, over ~1km of strike and open to the south-east, e.g. 15m at 15.1% TGC. Also a new 1,896km2 licence EPL0492 was granted, lifting holdings to 3,993km2.
Second batch of 68 infill holes shows wide, high-grade graphite, e.g. 18m at 19.3% TGC and 16m at 14.7% TGC, with up to ~200m surface width. 106 holes still pending; updated resource expected Q2 2018. Continues January's strong results.
First 36 of 210 infill aircore holes at Malingunde returned high grades, e.g. 23m at 21.2% TGC and 36m at 11.1% TGC. Results feed an updated resource due early Q2 2018. Also raises the Managing Director's salary to $215,000 from 1 Jan 2018.
The 5,000m infill aircore program at Malingunde for the PFS mine plan is finished. One rig has moved to three other saprolite targets, including Thete and Chiziro, about 40km away. Assays are expected in Q1 2018. A second rig has started groundwater drilling.
Maiden JORC resource for Malingunde: 28.8Mt at 7.1% TGC saprolite, including 8.9Mt at 9.9% TGC high-grade. Total 65.1Mt at 7.1% incl. saprock and fresh rock; 80% Indicated. Company calls it the largest reported saprolite graphite resource; the high-grade part will be the scoping study focus.