Each one in plain English, with the numbers worked through for a shareholder.
31 Oct 2014quarterly activities report● Neutral
September 2014 quarter: reports completed Duwi drilling (48 holes, 5,285m), the maiden 86Mt at 7.1% TGC resource, SGS metallurgical confirmation and the start of a scoping study. All previously announced; no new results.
2014 annual report repeats the financial-report content: Duwi and Dedza metallurgy, Duwi Bend discovery and early drill results. Adds corporate governance and shareholder information sections. Financial figures are not in the text provided. Largely a re-release of the 26 September accounts.
Independent SGS Lakefield testwork reproduced the 2013 Mintek Duwi results, with Extra Large and Large flake close to two-thirds of concentrate. Bench-scale variability and upscaling testwork has now begun. Confirms earlier metallurgy; flowsheet still needs optimising.
Maiden JORC resource at Duwi: 86Mt at 7.1% TGC (6.13Mt contained graphite, 5% cut-off), with 35Mt Indicated. Resolves the open resource thread. A scoping study on 30,000tpa and 65,000tpa production scenarios starts immediately.
The 2014 Duwi drilling is complete: 48 RC and diamond holes (5,285m) assayed, with results such as 76m at 9.3% TGC. Mineralisation spans ~2.2km of the ~24km Duwi Trend and stays open. CSA Global is modelling the maiden resource, due mid-October.
Annual financial report to 30 June 2014. Directors' report repeats the Duwi and Dedza metallurgy, the Duwi Bend discovery and early drill results; the program is stated complete (6,393m, June-September 2014). Financial figures are not in the text provided. Board and Deloitte unchanged.
First 11 RC holes of the 2014 Duwi program returned thick shallow intercepts, e.g. 84m at 9.8% TGC from 24m. Supports the 2013 modelling. 31 RC and 4 diamond holes are still awaiting assays; maiden JORC resource expected early Q4 2014.
June 2014 quarter: repeats the Duwi Bend trench (170m at 8.0% TGC), Dedza saprolite metallurgy, the $3.35M placement and Syme's appointment as Managing Director. Adds that 27 RC holes (2,244m) of a ~4,000m Duwi program were done, plus ultra-pure 99.97-99.98% C purification tests.
Trenching found a new graphite zone, Duwi Bend, just east of Duwi Main: one trench returned a cumulative 170m at 8.0% TGC. A second new zone is mapped at Nyama. Drilling continues toward a maiden JORC resource in Q4 2014.
July 2014 company presentation repeats the Duwi and Dedza results and states a JORC estimate for Duwi is due late 2014. Cites a market capitalisation of $33.0M at 7 July 2014. Largely repeats known facts.
First scoping metallurgy on Dedza saprolite gave concentrate with almost 48% Extra Large and Large flake (17.3% at 96.5% C, 30.5% at 95.9% C), with no primary grind needed. Supports the idea of a low-cost operation; scoping-level only.
The placement of 15.25M shares at $0.22 to raise $3.35M before costs is complete, as announced 21 May. Funds go to accelerating Malawi exploration and testwork plus working capital. Also issued 4.5M incentive options to the incoming Managing Director.
What it means for a shareholder
15.3m new shares at $0.220 to raise about $3.4m. Shares on issue before the raise aren't in the record, so the dilution can't be worked out.
21 May 2014capital raising announcement● NeutralMajor
Matthew Syme will become Managing Director once the Sierra/RTG merger completes; Peter Woodman moves to Technical Director. Sovereign also places up to 15.25M shares at $0.22 to raise $3.35M, with Aterra taking 1.35M; dilution 16.2%. Syme gets 4.5M options.
What it means for a shareholder
15.3m new shares at $0.220 to raise about $3.4m. Shares on issue before the raise aren't in the record, so the dilution can't be worked out.
March 2014 quarter: repeats the Dedza Mountain East trench results, the Chipili trenching and the January Duwi metallurgy, and notes the new saprolite testwork program. Trenching continues at Dedza. Largely repeats earlier announcements; no new results.
Sovereign has begun washing and flotation testwork on soft saprolite from Duwi and Dedza, since earlier testwork covered only hard rock. Drilling at Duwi, Dedza Mountain and Nanzeka is to start shortly. Saprolite is said to offer potentially lower mining costs; no new results.
Trenching at the newly discovered Dedza Mountain East graphite prospect, in the 100%-owned Malawi project, returned widths such as 20m at 10.3% TGC in soft saprolite, mapped over ~4km. A second zone, Dedza Mountain West, is mapped over ~20km; trenching is under way. A second major target beyond Duwi.
Partner Mount Isa Mines (Glencore, formerly Xstrata Copper) drilled 20 holes for 3,612m at Mongoose near Cloncurry, with intercepts such as 16m at 4.20% Cu. Sovereign holds 38% of the Carpentaria JV; Mount Isa Mines will review before deciding further drilling.
Half-year report to 31 December 2013 opens with the directors' report, repeating the January Duwi metallurgy (87.5% recovery, 92.0% TGC) and the completed ten-hole, 1,388m drill program. Board and Deloitte unchanged. Financial figures are not in the text provided.
December 2013 quarter: repeats the January Duwi metallurgical results (92.0% TGC, 87.5% recovery, over 35% extra-large flake). Next phases are an initial Duwi Mineral Resource and bench-scale metallurgical testing. No new information.
First metallurgical testwork on Duwi core produced concentrate at 92.0% TGC with 87.5% recovery. Over 35% is extra-large flake (+300µm, 95% TGC). Resolves the pending sighter work. Next steps are an initial Duwi resource and further bench-scale testing.
September 2013 quarter: reports the completed ten-hole, 1,388m drill program and trench results at Duwi and Nanzeka, already announced on 17 September. Metallurgical testwork at MINTEK continues. No new results.
2013 Annual Report, a repeat of the 30 June accounts released in September with added corporate governance and shareholder information sections. Repeats known drilling and trenching results; no new information in the text provided.
Full-year statutory accounts to 30 June 2013 open with a directors' report repeating the Malawi drilling, trenching and VTEM results and the January $3M placement. Board and Deloitte as auditor unchanged. Financial figures are not in the text provided.
First drill results confirm medium to high-grade flake graphite at Duwi and Nanzeka, e.g. Duwi 48m at 7.7% TGC and Nanzeka 10m at 11.0% TGC. Ten holes (1,388m) and 15 trenches done; mineralisation is open along strike and at depth. Grades are moderate versus earlier rock-chip highs.
June 2013 quarter: the ten-hole, 1,362m diamond program is complete and 1,320m of Duwi trenching finished. Samples are with laboratories and metallurgical work has started at MINTEK. No assay results yet.
Initial diamond drilling has begun at the Central Malawi Graphite Project: a 9-hole program at the Duwi Trend and Nanzeka to test depth and grade and obtain fresh material for metallurgy. Duwi trenching is finished. Follows the planned trench-then-drill sequence.
March 2013 quarter: Chipili and Nyama discoveries extend the Duwi Trend past 24km, Nanzeka trenching reported, and new licence EPL0372 granted covering the Duwi Trend. Drilling at Duwi expected within weeks. Largely repeats earlier announcements.
First trenching results at Nanzeka (Malawi graphite) show wide high-grade bands, e.g. 34m at 13.3% TGC and 38m at 11.7% TGC, over ~2km strike. Confirms the earlier rock-chip results. Duwi trenching and ~1,500m diamond drilling await permits, expected within weeks.
Securities trading policy, amended 5 March 2013, sets when directors, management and employees may deal in company shares, including closed periods. Administrative document with no operational or financial information.
Half-year report to 31 December 2012 opens with the directors' report, repeating the Malawi graphite acquisition, rock-chip and VTEM results and the January $3M placement. Board unchanged; Deloitte auditor. Financial figures are not in the text provided.