Each one in plain English, with the numbers worked through for a shareholder.
15 Apr 2013drilling result▲ GoodMajor
Assays for 13AMD0034 returned 60m at 1.66 g/t gold equivalent, and 449.5m at 0.77 g/t from immediately below cover. A new off-hole electromagnetic anomaly, 3 to 4 times stronger than earlier ones, is a priority drill target. Resolves the pending assays.
Assays for third Calibre hole 13AMD0033 returned 373.3m at 1.01 g/t gold equivalent, with gold grade 62% higher than 12AMD0032. Confirms the preliminary 7 March visuals and strengthens the Calibre discovery, which remains open.
Fourth Calibre hole 13AMD0034 (preliminary, visual) intersected 450m of semi-continuous mineralisation to 564.1m, with new copper-gold zones above the magnetic model. Fifth hole 13AMD0035 in progress with 195m so far; mineralisation now 190m of strike, 460m deep. Assays pending.
Hole 13AMD0033 intersected 380m of near-continuous mineralisation to 471.4m, ending in mineralisation. Calibre now confirmed over 160m of strike and 420m vertical depth. Copper looks similar or locally better than 12AMD0032; assays pending. Hole deviated off target, so a fourth hole is testing the zone.
Calibre drilling restarted on 28 February after the cyclone suspension. First Phase 1 hole expected to finish in the first half of next week. Resolves the weather delay.
Downhole survey of hole 12AMD0032 found three electromagnetic conductors, which the company says may mark more strongly mineralised sulphide zones. Hole 13AMD0033 is nearing completion. Supports the drilling plan but no new assays.
Drilling of hole 13AMD0033 began at Calibre, testing the conductivity anomaly and stepping toward the centre of the magnetic anomaly. A second hole is planned for the anomaly centre. No results yet.
Calibre Phase 1 is running ahead of schedule: the downhole electromagnetic survey has begun and diamond drilling is due to start this week. Up to 2,000m, about one month. No new results.
2013 Phase 1 at Calibre: up to 2,000m of diamond drilling from early March for about one month, plus electromagnetic surveys from February. Targets the stronger magnetic and conductivity anomalies north of the discovery holes, following up the February assay results.
Calibre assays confirm a major gold-copper discovery: 75.7m at 0.73 g/t gold, 0.42% copper (1.59 g/t gold equivalent), within 347m of near-continuous mineralisation. Only two holes drilled, still open at depth and in all directions. Resolves the awaited Calibre assays.
Corker Phase 2 assays: the thickest intersection yet, 1.59m at 7.28 g/t gold equivalent (91 g/t silver, 1.85% copper, 4.25% zinc, 2.07% lead). The company says 1.5-2m thicknesses could be economic. Calibre assays due late January.
Phase 2 finished (8 holes, 2,603m). Calibre (formerly T4) is a second greenfields discovery, with two holes showing several hundred metres of copper-gold mineralisation. Corker hit 1.5m of semi-massive sulphides. Pellet had narrow mineralisation; assays due late January.
Phase 2 drilling has started at Corker, the first of up to 6 holes to test for thicker sulphides. Phase 2 totals up to 3,500m (up to 10 holes), with single holes planned at Trigger, T4, Pellet and Beretta.
Phase 1 Magnum assays extend gold-copper-silver mineralisation 400m north and 600m south of the 27.8Mt resource, confirming over 1.8 km of strike. Best result: 1.38m at 1.72 g/t gold, 6.79% copper. Phase 2 design is being finalised.
Full Corker assays show only thin intercepts, best 0.13m at 20.5 g/t gold equivalent; hole 12AMD0019 had no significant intercept. Company says the sulphides don't explain the EM anomaly and plans Phase 2 follow-up. Cash was $2.5m at 30 June, market cap $4.7m at 6c.
Corker assays are delayed by a four to six week lab turnaround, now expected mid to late July. Magnum extensional drilling should finish by mid-July, with results by end of September. No new results.
Corker's first hole hit narrow high-grade silver-lead-zinc: 0.13m at 772 g/t silver, 14.8% lead. Four holes drilled (two more than planned); other assays pending. Magnum mineralisation extends 100-200m north and south of the resource, with assays awaited.
Drilling started 20 April on the first of two planned diamond holes at Corker, a strong electromagnetic anomaly less than 4 km from Magnum; about 2-3 weeks to drill. Magnum step-outs follow; Phase 2 to be announced after Phase 1.
Diamond rig mobilising 14-15 April to start the first of two planned Corker holes, taking about 2 to 3 weeks. Corker was flagged by the 2011 LandTEM survey. Magnum step-out drilling follows.
Phase 1 of the 2012 Citadel programme: 2,500 m of diamond drilling and up to 10,000 m of aircore. Step-outs 500m north and 600m south of the Magnum resource, plus the first Corker hole from mid to late April. Phase 1 ends July/August.
Maiden Inferred resource for Magnum, delivering the Q2 2012 target a little early: 27.8Mt at 0.5 g/t gold and 0.3% copper, containing 415,000 oz gold and 77,000 t copper (about 900,000 oz gold equivalent). Company says it covers a small part of the corridor.
Final Magnum assays confirm a very large, low-grade gold-copper system with higher-grade zones, e.g. 13.25m at 2.15 g/t gold and 22m at 0.60 g/t gold, 1.07% copper. Late results meant no follow-up in 2011; 2012 drilling will target higher-grade zones and Corker.
First assays at Magnum: hole 1 gave 54.33 m at 0.63 g/t gold and 0.35% copper; hole 2 gave 100.37 m at 0.45 g/t gold. Gold grades were lower than earlier drilling, which the company attributes to sampling. About 5,000 m was drilled in 2011; remaining assays are due through January 2012.
LandTEM ground survey shows a Magnum conductivity anomaly about 1.8 km long, larger than the drilled area, and not explained by sulphides found so far. Corker, 4 km away, gave a response over twice Magnum's strongest; drilling is planned for 2012.
Contractor problems, including a faulty RC rig and no extra diamond rig, will likely shrink the 2011 Magnum programme to 3,500-8,000 m versus the 12,000-15,000 m contracted. Antipa says this still meets most objectives; the maiden resource drilling moves toward 2012.
Released after an ASX price query: the first Magnum diamond hole, at 428 m and still drilling, has intersected seven mineralised zones, five more than historic holes. Assays are not yet available; the findings are visual only and the drilling interpretation is supported.
VTEM survey found a 1.8 km conductivity anomaly at Magnum, 1.3 km longer than historic drilling, and 34 greenfield targets (11 high priority). Top target Corker is 4 km north. Ground EM follow-up is under way, with drilling due by year-end. No drill assays yet.
Drilling started at Magnum on the weekend of 13-14 August, on schedule, within a 12,000-15,000 m programme running to November. First priority is delineation drilling aimed at a maiden resource, with a ground EM survey planned for September.
Geotech Airborne is engaged for a helicopter electromagnetic survey over 350 km2 of the 1,714 km2 Citadel Project, starting early June 2011. Results are expected in July, aiming to validate targets and guide Magnum work.