Each one in plain English, with the numbers worked through for a shareholder.
8 Feb 2016drilling result▲ GoodMajor
Review of historic drilling at the Minyari and WACA deposits, acquired into the 100%-owned North Telfer Project, shows high-grade gold, e.g. 38m at 4.47 g/t. Mineralisation starts 1-10m below surface; company calls it its possible best near-term development opportunity. Outside the Rio Tinto farm-in.
Calibre Phase 2 assays confirm high-grade gold, including 81m at 1.77 g/t and 81m at 1.83 g/t, and 6m at 8.50 g/t including 2m at 23.97 g/t. The company says these are its best Citadel intersections to date. Resolves the awaited assays; Rio Tinto-funded.
At ASX's request, clarifies the 17 November visual sulphide estimates: chalcopyrite up to 10% and bismuthinite up to 1%, with only 19 of 1,987 samples above 1% chalcopyrite. Grades cannot be given before assays, now expected in two to three weeks.
Calibre Phase 2 RC drilling finished 16 Nov: 18 holes, 3,711m, none in contingent Stage 3. Visual and portable XRF indicators show mineralisation extended 300-400m north, to over 1.5km total strike. Mineralisation weakens northward; assays due in about six weeks and IP surveys planned for 2016.
Phase 2 Calibre RC drilling has started under the Rio Tinto farm-in: up to 30 holes and 5,000m, taking up to six weeks depending on the contingent Stage 3. Assays are expected after drilling finishes.
The Phase 2 Calibre RC programme, funded under the Rio Tinto farm-in's first $3 million, is set to start on 20 October: up to 30 holes and 5,000m in three stages, aiming to extend northern high-grade mineralisation to 1.6-3.9km of strike.
Rio Tinto Exploration can earn up to 75% of the Citadel Project, including Calibre, by spending up to $60 million: $3m in 18 months, then $8m for 51%, $14m for 65%, $35m for 75%. Ends the search for a JV partner; Antipa operates first stage and keeps North Telfer and Paterson 100%.
Final Calibre assays include 20m at 2.25 g/t gold and 0.36% copper. The company says the programme exceeded its objectives and the Exploration Target has materially increased. A magnetic trend extends a further 3.5km north. Completes the assay series begun in June.
Assays confirm a new high-grade gold zone over 450m of strike north of the Calibre magnetic anomaly, with intercepts of 85m at 1.27 g/t gold and 105m at 1.18 g/t gold. Management calls Calibre a major new discovery. Mineralisation now spans 1km of strike and remains open.
Phase 1 Calibre RC programme finished: 32 holes for 4,764m, fewer than the ~60 holes originally planned. Assays for holes 3-24 are due within 7-10 days, the rest in late July. Visual indications of higher grade outside the magnetic anomaly still need assay confirmation.
First Calibre RC hole returned 30m at 2.30 g/t gold and 0.20% copper, including 1m at 22.76 g/t gold. Visual signs suggest higher grade continues outside the magnetic anomaly. Company plans fewer holes than the original ~60, focused on a new northern zone. Assays pending for most holes.
Slimline RC drilling began at Calibre on 14 May, ahead of schedule: about 60 holes for 9,000m over up to 1km x 500m, costing about $650,000 and taking about six weeks. Assays are due July-August. This is the programme funded by the April rights issue.
Antipa republished Calibre and Magnum resources under JORC 2012: combined 1.2Moz gold and 139,000t copper, all Inferred. Calibre is 47.8Mt at 0.56 g/t gold (867koz); Magnum 16.1Mt at 0.66 g/t (339koz). This restores resources withdrawn in July 2014.
Antipa won $147,000 of WA Government EIS co-funding for four Calibre diamond holes totalling up to about 1,400m, 50% co-funded, to test Telfer-style high-grade reef controls. It follows the September review. Drilling timing is not stated.
A technical review of Calibre identified controls on higher-grade, Telfer-style reef mineralisation, with narrow zones up to 31.8 g/t gold. Future drilling will be oriented southwest to cross more reef zones, shifting exploration focus to higher-grade targets. No new drilling results.
Antipa withdrew its April 2014 presentation because gold-equivalent grades lacked enough metallurgical testwork under JORC 2012. It removed equivalents and the earlier JORC 2004 Calibre and Magnum Inferred resources, and restated the Calibre exploration target. Reverses previously published resource figures.
Assays confirm the soil anomaly was likely displaced from mineralisation, and ANK-E had no significant intersections. Corker's best was 1.4m at 26.5 g/t silver, 0.83% lead and 0.55% zinc. The company is encouraged by thickening to the west. Closes the 2014 Phase 1 program.
Two Corker holes extended mineralisation to about 350m by 150m but showed no gain in thickness or grade, so a third hole was dropped. A hole at ANK-E hit 34m of weak copper. Phase 1 drilling is complete; assays pending.
Three holes testing the soil anomaly between Calibre and Magnum found only weak mineralisation, and two of them extended Calibre's footprint. Antipa deferred further testing of the anomaly and began the co-funded Corker drilling; assays were pending.
Diamond drilling restarted at Calibre on 15 May 2014, first testing the untested strongest zone about 150m southeast of existing drilling. Up to 2,000m over 4-6 weeks, aiming to extend Calibre-Magnum mineralisation beyond 2.9km. Follows the soil surveys.
Closer-spaced Phase 2 soil sampling defined drill targets: Calibre South (1.5km long, up to 350m wide, untested) and Matilda, south of Corker (650m by 450m, untested). Drilling is upcoming. Builds on the March soil survey results.
Soil geochemical surveys in February 2014 found a Calibre anomaly 2km long and up to 600m wide, strongest in a 1.5km zone south of existing drilling that is untested. Corker shows several anomalies over 2.7km, and ANK-H is a new 1km target. These are targets, not drill results.
Maiden Calibre Inferred resource of 48.4Mt at 1.02 g/t gold equivalent for 1.59Moz, by Snowden, from eight holes. It turns part of the earlier exploration target into a resource, which is revised to 130-290Mt at 0.8-1.2 g/t. Mineralisation stays open.
Eighth hole 13AMD0038 returned 497m at 0.64 g/t gold equivalent. Antipa gave a Calibre exploration target of 5.1 to 13.7 million gold equivalent ounces (200 to 350Mt at 0.8 to 1.2 g/t). This is a target, not a resource. Further drilling awaits a Snowden conceptual study.
Seventh Calibre hole 13AMD0037 returned 25m at 2.62 g/t gold equivalent, the highest grade so far at Calibre. Mineralisation now spans 210m of strike and 540m depth and remains open. Eighth hole is complete, with assays due in late August.
Phase 2 diamond drilling restarted at Calibre on 27 June 2013. First hole 13AMD0037 targets the Conductor 4 anomaly and the western edge of the mineralisation. Phase 2 is now sized at up to 2,500m over 6 to 8 weeks, down from 4,000m planned.
Phase 2 drilling at Calibre is planned to restart in late June 2013, with one rig and up to 4,000m of diamond drilling over about two and a half months. It targets the strong Conductor 4 anomaly and extending strike to 400m. Follows the Phase 1 geophysics.
Surface electromagnetic survey found a conductor up to 400m long beyond existing drilling, and a ground magnetic survey confirmed the large Calibre target (800m x 600m, potentially open to 630m depth). Two North Telfer tenements were granted. No new drilling results.
Sixth Calibre hole 13AMD0036 returned 85.75m at 1.18 g/t gold equivalent, including 31.52m at 1.42 g/t, confirming southern continuity. Grade rises with depth toward the untested conductor. Ground magnetic survey has begun. Incremental result.
Fifth Calibre hole 13AMD0035 returned 87.25m at 1.60 g/t gold equivalent within 273.5m at 1.13 g/t, described as the best Calibre intersection to date. Gold grade and volume appear to increase to the north. A large conductor remains untested.